Accessories

  • Heads
  • Skids
  • Cabling
  • Tools

Heads

View the available head configuration options »

Less then 6” (150 mm) Pipe, Sub-Six Head Assembly

17-32127

Used on the TRY TEK Robotic Lateral Tap Cutter in 6” (150 mm) Pipe
Slide travel: 2” (50 mm)
Over All Length: 3” (75 mm)
Included with the Cutter 03-1001-E


6” (150 mm) Pipe, Head Assembly

17-32047

Used on the TRY TEK Robotic Lateral Tap Cutter in 6” (150mm) Pipe
Slide travel: 2” (50 mm)
Over All Length: 4.25” (108 mm)
No longer included with the Cutter


8” (200 mm) - 10” (250 mm) Pipe, Head Assembly

17-32049

Used on the TRY TEK Robotic Lateral Tap Cutter in 8” (200mm) to 12” (300 mm) Pipe
Slide travel: 2.687” (68 mm)
Over All Length: 5.25” (133 mm)
Included with the Kit 19-46035


12” (300 mm) - 15” (380 mm) Large Pipe, Partial Head Assembly

17-32080

Used on the TRY TEK Robotic Lateral Tap Cutter in 12” (300 mm) to 15” (380 mm) Pipe with the 19-42024
Planetary Gear Box
Slide travel : 4” (100 mm)
Over All Length: 7.125” (181 mm)
Included with the Kit 19-46035


.6 HP (447 W) Square Air Router Mount

18-40013

For 6” (150 mm) pipe.
Included with the Cutter 03-1001-E


.6 (447 W) & .9 (671 W) HP Round Air Router Mount

15-20409

For 8” (200 mm) – 12” (300 mm) pipe.
Used with 15-20375 or 15-20374 (below)
Included with the Kit 19-46035


.6 (447 W) & .9 (671 W) HP Round Air Router Mount

15-20375

For 12” (300 mm) - 15” (380 mm) pipe used with large pipe heads.
Included with the Kit 19-46035


.9 (671 W) HP Gear Reduction Air Router Mount

15-20374

For 18” (450 mm) – 36” (900 mm) pipe used with large pipe heads.


Right angle or Front Facing Air Router Mount

18-40014

Used with Head Assemblies 17-32127, 17-32047 & 17-32049
Included with Sub-Six Kit 18-40012


Right Angle or Front Facing Air Router Mount

18-40015

Used with Head Assembly 17-32080


Large Pipe, Head Gearbox Assembly

19-46024

Used to mount Large Pipe Heads to the TRY TEK Robotic Lateral Tap Cutter.
Included with the Kit 19-46035


 

Skids

8” (200 mm) Pipe, Skid Assembly

17-32130

Used on the TRY TEK Robotic Lateral Tap Cutter. This skid assembly is used to adapt the cutter for use in 8” (200 mm) to 15” (380 mm) pipe.
Included with the Kit 19-46035


10” (250 mm) Pipe Spacer

15-20361

Used on the TRY TEK Robotic Lateral Tap Cutter for 10” (250 mm) Pipe. Requires 8 spacers to and the 8” (200 mm) Skid Kit Assembly.
Length 1.00” (25.40 mm)


12” (300 mm) Pipe Spacer

15-20362

Used with the TRY TEK Robotic Lateral Tap Cutter for 12” (300 mm) Pipe. Requires 8 spacers and the 8” (200mm) Skid Kit Assembly.
Length—2.00” (54.80 mm)
(8 each) Included with the Kit 19-46035


15” (380 mm) Pipe Spacer

15-20363

Used with the TRY TEK Robotic Lateral Tap Cutter for
15” (380 mm) Pipe. Requires 8 spacers and the 8” (200mm) Skid Kit Assembly.
Length—3.50” (88.90 mm)
(8 each) Included with the Kit 19-46035


Large Pipe Skid Runner

15-20359

Used on the TRY TEK Robotic Lateral Tap Cutter for 8” (200 mm) to 15” (380) Dia. Pipe Requires 4 runners per skid assembly.
(4 each) Included with Part No. 17-32130


Tow Cable Assembly

17-32129

Cable attaches to front and rear of cutter, two of these cables are included with each cutter 03-1001-E


Sub-Six Pipe Kits

18-40012

Sub-Six Kit with 90 degree Air Router


Sub-Six Pipe Kits

18-40016

Sub-Six kit with .6 HP Air Router

Now part of the 6" cutter

 


 1.Font view of cutter with an 18-40016 Sub-Six kit going through a 5-1/2" j(138 mm) inside diameter pipe with a 1" (25 mm) offset

2. Side view with the same 1" (25 mm) offset


6” (150 mm) Pipe, Air Bag Assembly

02-0009A

Standard Air Bag
Included with the Cutter 03-1001-D2 E


8” (200 mm) to 15” (380 mm) Pipe, Air Bag Assembly

17-32121

Used with cutter in 8” (200 mm) to 15” (380 mm) pipe
Included with the Kit 19-46035

Cabling

5 Conductor Cable Reel

19-46046

Portable Storage Reel with 500' (153 m) of 18/5 SOOW Black Portable Service Cord; INDOOR/OUTDOOR. Cable has proper terminal connections at both ends. One end connects to the TRY TEK control box and the other end connects to the cutter power cable. 

Size: 16" (400mm) x 16" (400mm) x 20" (500mm) tall

Weight: approximately 90 lbs. (41kg)


Bench Test Cable, from cutter to control box

15-20283

Used to test you cutter while working on it.
Included with the Cutter Kit 19-46035


Standard Duty 5 Wire Cable Assembly

14-17320

(.290” (7.3 mm) diameter)
Comes standard with cutter (replaces old flat style power cable 14-0013)
Included with the Cutter 03-1001-E

 

 


Power Cable, 5 Pin Female, Yellow, 7.3mm Cable Diameter


13-6837

Same yellow cable that comes with 14-17320; Standard Duty 5 Wire Cable Assembly (shown above)

Less the black Seacon connector

2 meters long


Heavy Duty 5 Wire Power Cable Assembly

17-32041

(.520” (13 mm) diameter)
Optional Power Cable Assembly

 


Power Cable, 5 Pin Female, Yellow, 13mm Cable Diameter

04-0051

Same yellow cable that come with 17-32041 Heavy Duty 5 Wire Power Cable Assembly (shown above)

Less the black Seacon cable

2 meters long 

 


5 Ft. (1.5 m) Seacon Extension Cable

15-20291

Used to extend truck cable at cutter end.


Male 5 Conductor Seacon

04-0038

Used for truck cables.


Female 5 Conductor Seacon

13-6393

Used for truck cables.
Recommended for first time purchase


Control Box Cable Plug

13-6212

Cable Clamp

13-6213

Used to adapt truck wiring to cutter control box.
Recommended for first time purchase


Bulk Head Receptacle - 5 Pin - Male Threads

04-0052

5 Conductor Receptacle for back of cutter

 

 

  

Tools

Female Contact Removal Tool

19-46010

Used to remove female contacts inside the cutter.
Included with the Cutter Tool Kit 19-46041


Male Contact Removal Tool

19-46011

Used to remove male contacts inside the cutter.
Included with the Cutter Tool Kit 19-46041


Contact Insertion Tool

19-46012

Used to insert male and female contacts.
Included with the Cutter Tool Kit 19-46041


Open Barrel Contact Crimp Tool

13-6734

Included with the Cutter Tool Kit 19-46041


Air Router Spanner Wrench

15-20360

T-Handle, 3/8 Square Drive

13-6733

Used with .6 (447W) & .9 (671W) HP Air Routers

Included with Cutter Tool Kit 19-46041