T80 CUTTING SYSTEM - New Single Cart Design

Click here for PDF Brochure 

 
TRENCHLESS RELINING OF SMALLER DIAMETER SEWER PIPES

Besides the need for relining sewer mains, there is also a growing need to reline the smaller diameter lateral pipes that run from buildings to the main lines. These smaller pipes crack, separate and break and are responsible for 50% of the inflow and infiltration of ground water to be processed by municipal sewage processing plants.
RELINING OF INTERIOR DRAIN PIPES
In both small and very large, multi-story buildings, there are significant savings to be realized in terms of time, cost and inconvenience to tenants by relining interior sewage pipes instead of breaking through walls and floors to replace them.
REINSTATEMENT OF LATERAL CONNECTIONS
Once these 3”, 4” and 6” pipes (80, 100 and 150 mm) have been relined, there is a need to reinstate the connections that feed into them. This is where TRY TEK’s new T80 CUTTER SYSTEM plays an important role. By accessing connecting laterals through cleanouts and vents, the blocked pipe connections can be easily and systematically reopened.
T80 CUTTER SYSTEM FEATURES:
FLEXIBLE - The cutting head is maneuverable through 3”, 4” and 6” pipe (80, 100 and 150 mm) around standard 90 degree elbows.  The 4” skid package allows entrance through 3” pipe, while the 6” skid package allows entrance through a 4” pipe.
POWERFUL - Water hydraulic cutting gives big power in a smaller package.
ENVIRONMENTALLY SAFE - Water hydraulics eliminates potential environmental hazards
CONVENIENT – Access pipe systems via cleanout ports or rooftop vents 
 
SIMPLE - Set up and operation are quick and simple.
LONG REACH - 100 feet of reach (30 meters).
SELF CLEANING VIEWER - Cutting head includes color camera with lens wiper.
STRONG - Hydraulically actuated cutting head and clamping mechanism.
VERSATILE – Outdoor or indoor use. 
COMPACT – Entire unit fits through 24” opening (61 cm).
SUPPORTED - Serviced by the manufacturer. Express service available.
Note: Requires a standard pressure washer to power unit (minimum 2,000 p.s.i . and 4 gallons / minute or 138 bar and 15 liters/minute.)
 T80 Specifications